365外贸网
您查询的相关hs编码 15 条,您的查询关键词 抗拉强度
| HS编码 | 品名 | 实例汇总 | 申报要素·退税 | 编码比对 |
|---|---|---|---|---|
| 73181510.01 | 抗拉强度≥800兆帕，杆径＞6mm的其他螺钉及螺栓（不包括不锈钢紧固件）
(抗拉强度≥800兆帕，杆径＞6mm的其他螺钉及螺栓（不包括不锈钢紧固件）不论是否带有螺母或垫圈，非用于民用航空器维护和修理的) [Other screws and bolts, with tensile strength 800MPa or more, stem diameters exceeding 6mm ( whether or not with their nuts or washers, not used for the maintenance and repair of Civil Aircraft)] |
337条 | 查看详情 | -- |
| 73181510.90 | 其他抗拉强度≥800兆帕的螺钉及螺栓
(其他抗拉强度≥800兆帕的螺钉及螺栓不论是否带有螺母或垫圈) [Other screws and bolts with tensile strength 800MPa or more( whether or not with their nuts or washers,)] |
197条 | 查看详情 | 对比-73181510.01 |
| 81089010.10 | 钛合金,实心圆柱体,包括锻件
(钛合金,实心圆柱体,包括锻件20℃下极限抗拉强度≥900Mpa,外径超过75mm) [Titanium alloys, solid cylinder, including castings(ultimate tensile strength≥900MPa at 20℃, of an outer diameter exceeding 75 mm)] |
15条 | 查看详情 | 对比-73181510.90 |
| 76169910.10 | 高度小于直径的柱形实心体铝合金
(高度小于直径的柱形实心体铝合金在293K(20摄氏度)时的极限抗拉强度能达到460兆帕(0.46×10^9牛顿／平方米)或更大) [Solid aluminum alloy in column-shaped, tensile strength reaches 460 mega-P (0.46*109Newton/ m2) or more at 293K (20 degree centigrade), of an height less than diameter] |
11条 | 查看详情 | 对比-81089010.10 |
| 81089040.10 | 钛合金管
(钛合金管20℃下极限抗拉强度≥900Mpa,外径＞75mm) [Tubes or pipes of titanium alloys(ultimate tensile strength≥900MPa at 20℃, of an outer diameter exceeding 75mm)] |
3条 | 查看详情 | 对比-76169910.10 |
| 76042910.19
(已作废)
推荐查询: 76042910 |
柱形实心体铝合金
(柱形实心体铝合金(在293K(20摄氏度)时的极限抗拉强度能达到460兆帕(0.46×10^9牛顿／平方米)或更大（截面周长＜210毫米）)) |
3条 | 查看详情 | 对比-81089040.10 |
| 73044910.01
(已作废)
推荐查询: 73044910 |
非冷轧（拔）不锈钢制无缝锅炉管
(非冷轧（拔）不锈钢制无缝锅炉管(碳（C）含量≥0.04%并≤l.2%、铬（Cr）含量＞16%、镍（Ni）含量＞7%、铌（Nb）含量≥0.2%、抗拉强度大于等于550Mpa 屈服强度大于200Mpa)) [Boiler tubes and pipes , of stainless steel ( non cold-drawn or cold-rolled, tensile strength≥550Mpa,yield strength>200Mpa )] |
2条 | 查看详情 | 对比-76042910.19 |
| 76082010.10 | 外径≤10厘米的管状铝合金
(外径≤10厘米的管状铝合金在293K(20摄氏度)时的极限抗拉强度能达到460兆帕(0.46×109牛顿／平方米)或更大) [Tubes and pipes of aluminum alloy, of an outside diameter not exceeding 10cm,tensile strength reaches 460 mega-P (0.46*109Newton/ m2) or more at 293K (20 degree centigrade)] |
2条 | 查看详情 | 对比-73044910.01 |
| 73044110.01
(已作废)
推荐查询: 73044110 |
冷轧的不锈钢制无缝锅炉管
(冷轧的不锈钢制无缝锅炉管(碳（C）含量≥0.04%并≤1.2%、铬（Cr）含量＞16%、镍（Ni）含量＞7%、铌（Nb）含量≥0.2%、抗拉强度大于等于550Mpa 屈服强度大于200Mpa)) [Boiler tubes and pipes , of stainless steel ( cold-drawn or cold-rolled, tensile strength≥550Mpa, yield strength>200Mpa )] |
2条 | 查看详情 | 对比-76082010.10 |
| 73045190.01 | 高温承压用合金钢无缝钢管（抗拉强度≥620MPa、屈服强度≥440MPa）
(高温承压用合金钢无缝钢管（抗拉强度≥620MPa、屈服强度≥440MPa）外径在127mm以上（含127mm），化学成分（wt%）中碳（C）的含量≥0.07且≤0.13、铬（Cr）的含量≥8.5且≤9.5、钼（Mo）的含量≥0.3且≤0.6、钨（W）的含量≥1.5且≤2.0、抗拉强度≥620Mpa、屈服强度≥440Mpa) [Alloy steel seamless steel tubes for pressure and high temperature (≥ 620MPa, tensile strength, yield strength ≥ 440MPa) (chemical composition diameter ≥ 127mm, (wt%) 0.07 ≤ C ≤ 0.13, 8.5 ≤ Cr ≤ 9.5, 0.3 ≤ Mo ≤ 0.6, 1.5 ≤ W ≤ 2, cold drawn or cold rolled,] |
1条 | 查看详情 | 对比-73044110.01 |
| 73045910.01 | 高温承压用合金钢无缝钢管（抗拉强度≥620MPa、屈服强度≥440MPa）
(高温承压用合金钢无缝钢管（抗拉强度≥620MPa、屈服强度≥440MPa）外径在127mm以上（含127mm），化学成分（wt%）中碳（C）的含量≥0.07且≤0.13、铬（Cr）的含量≥8.5且≤9.5、钼（Mo）的含量≥0.3且≤0.6、钨（W）的含量≥1.5且≤2.0、抗拉强度≥620Mpa、屈服强度≥440Mpa) [Alloy steel seamless steel tubes for pressure and high temperature (tensile strength, yield strength ≥ 620MPa ≥ 440MPa ≥ 127mm) (boiler tube, the chemical composition (wt%) 0.07 ≤ C ≤ 0.13, 8.5 ≤ Cr ≤ 9.5, 0.3 ≤ Mo ≤ 0.6, 1.5 ≤ W ≤ 2, non cold drawn or co] |
1条 | 查看详情 | 对比-73045190.01 |
| 70191900.12 | 两用物项管制的其他短切原丝
(两用物项管制的其他短切原丝比模量≥3.18×10^6 m,以及比抗拉强度≥7.62×10^4 m) [Glass fiber or filaments (modulus ratio ≥12.3× 106m or more, ultimate tensile strength ≥0.3×106m or more)] |
1条 | 查看详情 | 对比-73045910.01 |
| 76042910.11
(已作废)
推荐查询: 76042910 |
柱形实心体铝合金
(柱形实心体铝合金(在293K(20摄氏度)时的极限抗拉强度能达到460兆帕(0.46×10^9牛顿／平方米)或更大（截面周长≥210毫米）)) |
1条 | 查看详情 | 对比-70191900.12 |
| 76042910.10 | 柱形实心体铝合金
(柱形实心体铝合金在293K(20摄氏度)时的极限抗拉强度能达到460兆帕(0.46×10^9牛顿／平方米)或更大) [Aluminum alloy bar and rod[tensile strength reaches at least 460 Mpa(0.46X109N/m2)at 293k(20℃）]] |
1条 | 查看详情 | 对比-76042910.11 |
| 70191200.20 | 两用物项管制的玻璃纤维无捻粗纱
(两用物项管制的玻璃纤维无捻粗纱比模量≥3.18×10^6 m,以及比抗拉强度≥7.62×10^4 m) [Glass fibres rovings, under control of sensitive items] |
1条 | 查看详情 | 对比-76042910.10 |